Mercia Garden Products 02DTTWR0707-V1-PEFC, Общее руководство по инструкции

Страница: 7 / 14

Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
Please retain product label and instructions for future reference
www.merciagardenproducts.co.uk P7
Step 5
Parts needed - & &
With the assembled Platform resting on
one side, secure one of the Rear Posts (No.10) to
the back of the platform. Use 2x150mm screws per
post and secure through the top of the platform.
Secure two corner braces
(No.12)
to the
post using 2x100mm screws per brace. Ensure the
braces are flush to the rear post and Tower Base.
Note: the post should be at a 90 degree angle and the
corner braces should be at a 45 degree angle to the
platform.
To ensure the front post
(No.11)
is at the
correct height, mark the height of the rear post on
to the front post and position into the cut out
section at the front of the platform as shown.
Secure using 2x150mm screws per post.
Fix two corner braces to the front post
(No.11)
as
previously and repeat the previous steps on the
remaining posts.
Carefully position the platform onto your base
and check that it is level.
16x100mm Screws
8x150mm Screws
100mm
screw
150mm
screw
A
C
B
10 12 11
1! 2!
Pre drill
hole
50kg
C
A
B
11
12
11
12
12
12
10
Step 6
The platform is ready for the
assembly of the playhouse on top.
Follow the instructions provided
with the playhouse.
Ensure to fix the playhouse to the
Bunk using the same fixing
method mentioned in the
playhouse instructions.
30mm
screw
Step 7
Parts needed - & &
Slot the steps
(No.16)
into the left and
right ladder side
(No.14 &15)
Fix in position using 4x30mm screws
per step.
16x30mm Screws
15
14
16
16 15 14
1! 2!
Pre drill
hole