P 6
Please retain product label and instructions for future reference
Please retain product label and instructions for future reference
Step 4
Place the newly assembled Gables above
the assembled panels. Make sure that the
Gables meet exactly in the middle and over
hang from the sides equally at approx
45mm.
Fix together using 50mm screws staggering
the screws so they do not collide.
8 x 50mm screws
50mm
screw
Pre drill
hole
6
5
6
4
3
Plain Gable Assembly
Step 5
7 x 50mm screws
Lay two of the plain side panels
(No. 2)
on a
level floor place them next to each other,
ensure they are level at the top and bottom
then fix together using 7x50mm screws.
Stagger the screws so they do not collide.
2
50mm
screw
Pre drill
hole
2
Place the other set of assembled Gables
(No. 3 & 4)
above the plain panels.
Make sure that the Gables meet exactly in
the middle and over hang the sides equally
at approx 45mm.
Fix together using 50mm screws staggering
the screws so they do not colide.
50mm
screw
Pre drill
hole
Step 6
8 x 50mm screws
2
2
4
3
