Please retain product label and instructions for future reference
P 19
Fix the T Hinges
(No. 31)
onto the doors
(No.
9)
as shown using 7 x 30mm screws per T
hinge.
Ensure that the screws go through the
cladding and into the framing behind.
If you have puchased a 20x10, repeat this step
when attaching the single door.
42 x 30mm screws
20x10 - 63 x 30mm screws
Step 12
30mm
screw
Pre drill
hole
31
31
Step 13
A.
To construct the truss, secure
the Truss supports
(No. 11)
together as shown with 2x30mm
screws.
B.
Secure the Truss Brace
(No. 12)
to both sides of the Truss support
making sure to stagger the
4x40mm screws.
C.
Finally secure the Truss support
triangle
(No. 14)
to both sides
with 3x30mm screws.
Repeat the steps above once for a
12x10, three times for a 16x10
and twice for a 20x10.
10x10 - 8 x 30mm Screws
- 4 x 40mm Screws
12x10 - 16 x 30mm Screws
- 8 x 40mm screws
16x10 - 32 x 30mm Screws
- 16 x 40mm screws
20x10 - 24 x 30mm Screws
- 16 x 40mm screw
A.
B.
C.
40mm
screw
30mm
screw
Pre drill
hole
30mm
screw
Pre drill
hole
Pre drill
hole
11
11
12
12
14
14
10x10 - 4x70mm Screws
2x100mm Screws
12x10 - 8x70mm Screws
4x100mm Screws
16x10 - 16x70mm Screws
8x100mm Screws
20x10 - 12x70mm Screws
6x100mm Screws
70mm
screw
100mm
screw
Pre drill
hole
13
13
Step 14
Place an assembled Truss central to
where two panels join. Align the
top of the truss one inch (25mm)
below the top of the sides as shown
in the diagram.
HINT - Use a piece from the fixing
kit as a guide.
Pencil mark the truss position and
remove truss.
Place the truss blocks
(No. 13)
up to
the pencil mark and fix using
2x70mm screws per block.
Place the truss back into position on
top of the support block and secure
using 100mm screw each side from
the top down through the truss and
into the block.
For 12x10, 16x10 and 20x10 attach a
truss where each panel joins. For
12x10 you will have two trusses,
for the 16x10 you will have four
trusses and for 20x10 you will have
three trusses.
10X10
20X10
16X10
12X10
