Please retain product label and instructions for future reference
P 15
Reverse Apex Installation
Remove transportation
blocks from the bottom
of each panel before
beginning assembly. Each
Panel should have two
Pre Assembly
Plain Gable Assembly
Step 1
7 x 50mm screws
Lay a Plain Side Panel
(No. 2)
and Small
Plain Panel
(No. 6)
on a level floor. Place
them next to each other, ensure they are
level at the top and bottom, then fix
together using 7x50mm screws.
Stagger the screws so they do not collide.
50mm
screw
Pre drill
hole
6
2
Step 2
7 x 50mm screws
Repeat the previous step when adding the
second Small Plain Panel
(No. 6)
, ensure
they are level at the top and bottom then fix
together using 7x50mm screws.
Stagger the screws so they do not collide.
50mm
screw
Pre drill
hole
6
2
6
Step 3
Place the Left Gable and Right Gable
(No. 3
& 4.
together and make sure that they meet
level.
Fix together in the middle using 50mm
screws staggering the screws so they do not
collide.
Repeat this step for both sets of gables.
Turn the Gables over, attach a Gable Point
(No. 17)
to the top of the assembled gables
using 30mm screws to complete the gable
assemblies.
10 x 50mm screws
50mm
screw
8 x 30mm screws
30mm
screw
Pre drill
hole
4
3
4
3
17
