Step 1
Lay the Door Panel and Gable Top on a level
floor place the gable top on top of the door
panel ensure they are level at the top then fix
together using 60mm screws. Stagger the
screws so they do not collide.
8x60mm Screws
Pre drill
hole
60mm
screw
5
1
11
Step 2
Line a Gable Strip up to the assembled
gable ensuring the bottom of the strip
lines up with the underneath of the
door panel framing as shown in the
illustration and fix in place using 40mm
screws.
6x40mm Screws
Pre drill
hole
40mm
screw
14
13
13
Step 3
Fix the door strips onto the front gable
using 4x30mm screws for each strip.
Ensure that there is a 10mm gap between
the door frame and the strips allowing
(No.14) to sit flush alongside (No.13).
12x30mm Screws
Pre drill
hole
30mm
screw
6
6
25
Step 4
Fix the T Hinges onto the doors and door
frame as shown above. Ensure that each of the
hinges are evenly spaced and screwed into
the Door framing.
42x30mm Screws
Pre drill
hole
30mm
screw
P 3
01GRODB1008-V3
Please retain product label and instructions for future reference
