Mercedes-Benz SL 550 BlueEFFICIENCY, Руководство оператора

Страница: 312 / 572

X
To store the waypoint in the destination
memory: select
Presets
with the
COMAND controller and press
W
to
confirm.
Once you have accepted the waypoint, it is
entered in the waypoint menu.
Waypoint menu with two waypoints
Editing waypoints
You can:
R
change waypoints
R
change the sequence in the waypoint menu
R
delete waypoints
To change the sequence, both waypoints
must be entered.
X
To change waypoints: select the symbol
for waypoint 1 or 2 in the waypoint menu
by turning
cVd
the COMAND controller
and press
W
to confirm.
X
Select
Edit
and press
W
to confirm.
X
Use one of the destination entry options
offered.
X
To change the sequence of the
waypoints: select
Swap
in the waypoint
menu by turning
cVd
the COMAND
controller and press
W
to confirm.
The entries are swapped.
X
To delete waypoints: select the symbol
for waypoint 1 or 2 in the waypoint menu
by turning
cVd
the COMAND controller
and press
W
to confirm.
X
Select
Delete
and press
W
to confirm.
i You can use this menu item to delete a
waypoint directly after entry.
Accepting waypoints for the route
X Select
Start
in the waypoint menu by
turning
cVd
the COMAND controller and
press
W
to confirm.
The route is calculated with the entered
waypoints.
i The Continue menu item is displayed
instead of
Start
if
Calculate
Alternative Routes
is activated in the
navigation menu (option 2) (
Y
page 327).
In the example, there are both waypoints
1
and
2
.
Entering a point of interest
Calling up the points of interest menu
Example: POI menu
POIs are predefined destinations within
categories, e.g. a gas station in the
AUTOMOTIVE
category.
310
Navigation
COMAND