Control panel for THERMOTRONIC automatic climate control (2-zone)
:
To set the temperature, left (
Y
page 125)
;
To set climate control to automatic mode (
Y
page 125)
=
To demist the windscreen (
Y
page 126)
?
To switch the residual heat on/off (
Y
page 129)
A
To activate/deactivate cooling with air dehumidification (
Y
page 124)
B
To switch the rear window heating on/off (
Y
page 127)
C
To switch the ZONE function on/off (
Y
page 126)
D
To set the temperature, right (
Y
page 125)
E
To switch the climate control on/off (
Y
page 124)
F
To set the air distribution (
Y
page 126)
G
To set the airflow (
Y
page 126)
H
To set the climate mode (
Y
page 125)
I
To activate/deactivate air-recirculation mode (
Y
page 128)
Information on using THERMOTRONIC
automatic climate control
Automatic climate control
The following contains instructions and recom-
mendations to enable you to get the most out of
your THERMOTRONIC automatic climate con-
trol.
R
Activate climate control using the
Ã
and
¿
buttons on the climate control panel.
The indicator lamps in the
Ã
and
¿
buttons light up.
R
In automatic mode, the
ñ
button on the
climate control panel may be used to addi-
tionally adjust the airflow (FOCUS/MEDIUM/
DIFFUSE). The MEDIUM level is recommen-
ded.
R
Set the temperature to 22 †.
R
Only use the "Windscreen demisting" function
briefly until the windscreen is clear again.
R
Only use air-recirculation mode briefly, e.g. if
there are unpleasant outside odours or when
in a tunnel. The windows could otherwise mist
up as no fresh air is drawn into the vehicle in
air-recirculation mode.
R
Use the ZONE function to adopt the temper-
ature settings on the driver's side for the
front-passenger side as well. The indicator
lamp in the
á
button goes out.
R
Use the residual heat function if you want to
heat or ventilate the vehicle interior when the
ignition is switched off. The residual heat
Overview of climate control systems
123
Clima
te
contr
ol
