X
To open fully: press the switch beyond the
point of resistance and release it.
Automatic operation is started.
X
To close manually: pull and hold the corre-
sponding button.
X
To fully close the front side windows: pull
the button beyond the point of resistance and
release it.
Automatic operation is started.
X
To interrupt automatic operation: press/
pull the corresponding switch again.
You can continue to operate the side windows
after you switch off the engine or remove the
SmartKey. This function remains active for five
minutes or until you open a door.
Before opening or closing the side windows, a
check is carried out to see whether a valid
SmartKey is in the vehicle. The check is carried
out if you use the start/stop button instead of a
SmartKey in the ignition and you press or pull a
button while the engine is switched off. This is
carried out by means of a brief radio connection
between the vehicle and the SmartKey.
Opening and closing all side windows
(Cabriolet)
Using the switch on the center console
G
WARNING
While closing the side windows, body parts in
the closing area could become trapped. There
is a risk of injury.
When closing make sure that no parts of the
body are in the closing area. If somebody
becomes trapped, release the switch or press
the switch to open the side window again.
Use switch
:
in the stowage compartment
under the armrest to close or open all side win-
dows simultaneously.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Fold the armrest to the left or the right
(
Y
page 269).
X
To open all side windows: press and hold
button
:
to the point of resistance.
X
To open all side windows fully: press
switch
:
beyond the point of resistance.
X
To close all side windows: pull and hold
button
:
.
Using KEYLESS-GO
G
WARNING
When using the convenience closing feature,
parts of the body could be trapped in the clos-
ing area when a side window is being closed.
There is a risk of injury.
Observe the complete closing procedure
when the convenience closing feature is oper-
ating. Make sure that no body parts are in
close proximity during the closing procedure.
The SmartKey must be outside the vehicle. All
the doors must be closed.
X
Convenience closing feature: touch
recessed sensor surface
:
on the door han-
dle until the side windows are fully closed.
i
Make sure you only touch recessed sensor
surface
:
.
X
To interrupt convenience closing: release
recessed sensor surface
:
on the door han-
dle.
92
Side windows
Opening
and
cl
os
ing
