Mercedes-Benz Customer Assistance Center
at 1-800-FOR-MERCedes (1-800-367-6372)
or 1-866-990-9007
You will be asked for your password.
The next time you are inside the vehicle and you
switch on the ignition, the
Doors Locked
Remotely
message appears in the multifunction
display.
Alternatively, the vehicle can be locked via:
R
the Internet, under the "Owners Online" sec-
tion
R
the telephone application (e.g. for iPhone
®
,
Android)
To do this, you will need your identification num-
ber and password.
Stolen vehicle recovery service
If your vehicle has been stolen:
X
Notify the police.
The police will issue a numbered incident
report.
X
This number will be forwarded to the
Mercedes-Benz Customer Assistance Center
together with your PIN.
The Mercedes-Benz Customer Assistance
Center then tries to locate the system. The
Mercedes-Benz Customer Assistance Center
contacts you and the local law enforcement
agency if the vehicle is located.
However, only the law enforcement agency is
informed of the location of the vehicle.
If the anti-theft alarm system is activated for
longer than 30 seconds, the Mercedes-Benz
Customer Assistance Center is automatically
notified.
Vehicle Health Check
With the Vehicle Health Check, the Customer
Assistance Center can provide improved sup-
port for problems with your vehicle. During an
existing call, vehicle data is transferred to the
Customer Assistance Center.
The customer service representative can use
the received data to decide what kind of assis-
tance is required. You are then, for example,
guided to the nearest authorized Mercedes-
Benz Center or a recovery vehicle is called.
If vehicle data needs to be transferred during an
MB Info call or a Roadside Assistance call, this is
initiated by the Customer Assistance Center.
The
Roadside Assistance Connected
mes-
sage appears in the display. If the Vehicle Health
Check can be started, the
Request for Vehi‐
cle Diagnostics Received Start vehi‐
cle diagnostics?
message appears in the
display.
X
Press the
Yes
button to confirm the message.
X
When the
Vehicle Diagnostics Please
Start Ignition
message appears: turn the
SmartKey to position 2 in the ignition lock
(
Y
page 136).
X
If the
Please follow the instructions
received by phone and move your vehi‐
cle to a safe position.
message
appears: please follow the instructions
received by phone and move your vehicle to a
safe position.
The message in the display disappears.
The vehicle operating state check begins.
During this procedure, you will see the
Vehi‐
cle Diagnostics Active
message.
If you select
Cancel
, the Vehicle Health
Check is canceled completely.
When the check is complete, the
Sending
vehicle diagnostics data. (Voice con‐
nection may be interrupted during
data transfer)
message appears. The vehicle
data can now be sent.
X
Press the
OK
button to confirm the message.
The voice connection with the Customer
Assistance Center is terminated.
The
Vehicle Diagnostics: Transfer‐
ring Data...
message appears.
The vehicle data is sent to the Customer
Assistance Center.
Depending on what the customer service rep-
resentative agreed with you, the voice connec-
tion is re-established after the transfer is com-
plete. If necessary, you will be contacted at a
later time by another means, e.g. by e-mail or
phone.
Another function of the Vehicle Health Check is
the transfer of service data to the Customer
Assistance Center. If a service is due, the display
shows a message to this effect together with
information about any special offers at your
workshop.
This information can also be called up under
"Owners Online" at http://www.mbusa.com.
Information on the data stored in the vehicle
(
Y
page 28).
Features
283
Stow
age
and
features
Z
