Mercedes-Benz S-Class 2023, Руководство оператора

Страница: 218 / 622

#
Standard setting: pull and hold paddle shifter
1 or 2 , or engage transmission position
h
again.
%
When the vehicle is started again, the stand-
ard setting will also be set.
The driver's display shows the currently selected
recuperation level next to the transmission posi-
tion display.
ECO Assist (plug-in hybrid)
▌ ECO Assist function
% The following function depends on the equip-
ment and the country.
ECO Assist analyzes data for the vehicle's expec-
ted route. This allows the system to optimally
adjust the driving style for the route ahead, save
fuel and recuperate. If the system detects an
event ahead and the vehicle nears the event, ECO
Assist will calculate the optimum speed for maxi-
mum fuel economy and recuperative energy
based on the distance, speed and downhill gradi-
ent.
If the deceleration provided by ECO Assist is not
sufficient, you must also brake with the service
brake. This is especially the case if, for example,
you pull away again in slow-moving traffic and the
distance to the vehicle in front is very short.
The function will be active in the following circum-
stances:
R
The function is activated in the multimedia
system (
/
page 217).
R
The
h
Ã
recuperation level is selected
(
/
page 215).
R
p
manual gearshifting is not activated.
R
Drive program C is not selected.
1
"Foot off the accelerator" recommendation
2 Route event ahead
If a route event that can be dealt with more effi-
ciently by adjusting your driving style is detected
ahead, corresponding symbol 2 and the ý
symbol will be displayed in gray.
If you release the accelerator pedal, the
ý
symbol will turn green and recuperation in over-
run mode will be initiated. If the deceleration is
not sufficient, also apply the service brake.
If ECO Assist intervenes for a route event ahead
and you then press the accelerator pedal, ECO
Assist's control is ended. This does not apply in
the case of a vehicle traveling in front.
216 Driving and parking