Mercedes-Benz S-Class 2023, Руководство оператора

Страница: 179 / 622

#
Turn the combination switch to the corre-
sponding position
1
-
5
.
#
Single wipe/washing: push the button on the
combination switch in the direction of arrow
1 .
R
í
Single wipe
R
î
Wipes with washer fluid
%
Observe the notes on washing the vehicle in a
car wash (
/
page 410).
Vehicles with MAGIC VISION CONTROL: in posi-
tion
2
or
3
, the windshield washing process is
automatically triggered if dirt is detected on the
windshield unless the Add Washer Fluid message
is being displayed.
Deep-cleaning the windshield
In the case of heavy soiling, you can deep-clean
the windshield above outside temperatures of
41°F (5°C).
#
In a stationary vehicle, turn the combination
switch to position
1
,
2
or
3
.
#
Press the button on the combination switch in
the direction of arrow 1 and hold it for
approximately two seconds.
The wiper arms will move into their replace-
ment positions and washer fluid will be distrib-
uted on the windshield.
After approximately 30 seconds, the wiper
arms will move back again and wipe the wind-
shield several times. Deep-cleaning will now
have finished.
Changing the windshield wiper blades
&
WARNING Risk of becoming trapped if the
windshield wipers are switched on while
wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can be
trapped by the wiper arm.
#
Always switch off the windshield wipers
and vehicle before changing the wiper
blades.
Moving the wiper arms into the replacement posi-
tion
#
Switch the vehicle on and then off again
immediately.
#
Within around 15 seconds, press and hold the
î
button on the combination switch for
approximately three seconds (
/
page 176).
The wiper arms will move into the replacement
position.
Removing the wiper blades
#
Fold the wiper arms away from the windshield.
Light and visibility 177