Mercedes-Benz S 65 AMG, Руководство оператора

Страница: 572 / 616

Replacing wiper blades
570
Replacing wiper blades
Safety notes
G
Warning!
For safety reasons, switch off wipers and
remove SmartKey from starter switch
(vehicles with KEYLESS-GO: Make sure the
vehicle’s on-board electronics have status
0) before replacing a wiper blade.
Otherwise, the wiper motor could suddenly
turn on and cause injury.
G
Warning!
Wiper blades are components that are
subject to wear and tear. Replace the wiper
blades twice a year, preferably in the spring
and fall. Otherwise the windows will not be
properly wiped. As a result, you may not be
able to observe surrounding traffic
conditions and could cause an accident.
!
To avoid damage to the hood the wiper
arms should only be folded forward when
in the vertical position.
! Never open the hood when a wiper arm is
folded forward.
Hold on to the wiper when folding a wiper
arm back. If released, the force of the
impact from the tensioning spring could
crack the windshield.
Do not allow a wiper arm to contact the
windshield glass without a wiper blade
inserted.
Mercedes-Benz recommends that you have
this work carried out at an authorized
Mercedes-Benz Center.
Placing wiper arms in vertical position
Wiper arms in vertical position
X
Make sure the hood is fully closed.
Vehicles with SmartKey
X
Turn the SmartKey in the starter switch to
position
1.
X
Turn combination switch to wiper setting
u
.
X With wiper arms in vertical position, turn
the SmartKey in the starter switch to
position
0.
X
Remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO
X
Make sure the vehicle’s on-board
electronics have status
1.
X Turn combination switch to wiper setting
u
.
X
Press KEYLESS-GO start/stop button
repeatedly until windshield wipers start.
X
Press KEYLESS-GO start/stop button when
the wiper arms are in a vertical position.
Practical hints