Mercedes-Benz S 65 AMG, Руководство оператора

Страница: 395 / 616

Driving systems
393
Blind Spot Assist cannot detect road, traffic
and weather conditions.
It is the driver’s responsibility at all times to
be attentive to road, weather and traffic
conditions and to provide the steering,
braking and other driving inputs necessary
to retain control of the vehicle. Failure to do
so could result in recognizing dangers too
late, possibly resulting in an accident and
serious injury to yourself and others.
In order for the Blind Spot Assist to function,
the radar sensors must be switched on and
operational.
When traveling in Canada in a vehicle not
registered in Canada, you must switch off the
radar sensor system (
Y
page 253). Canadian
law does not permit the use of the radar
sensor system for vehicles from outside of
Canada. When you switch off the radar sensor
system, the following functions are
deactivated:
R
Blind Spot Assist
R
BAS Plus (
Y
page 70)
R
PRE-SAFE
®
Brake (
Y
page 76)
R
DISTRONIC Plus (
Y
page 360)
R
Park Assist (
Y
page 379)
R
Advanced Parking Guidance (
Y
page 383)
i USA only:
This device has been approved by the FCC
as a “Vehicular Radar System”. The radar
sensor is intended for use in an automotive
radar system only. Removal, tampering, or
altering of the device will void any
warranties, and is not permitted by the
FCC. Do not tamper with, alter, or use in
any non-approved way.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
i Canada only:
This device complies with RSS-210 of
Industry Canada. Operation is subject to
the following two conditions:
1. This device may not cause interference,
and
2. this device must accept any
interference received, including
interference that may cause undesired
operation of the device.
Removal, tampering, or altering of the
device will void any warranties, and is not
permitted. Do not tamper with, alter, or use
in any non-approved way.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
Sensor monitoring range
The Blind Spot Assist is able to monitor a
range up to 10 ft (3 m) to the rear and both
sides of the vehicle.
G
Warning!
The Blind Spot Assist monitors certain
areas in the immediate vicinity of your
vehicle. Vehicles approaching and passing
at speeds that exceed the speed of your
vehicle significantly will not be detected.
There will be no warning display and no
audible warning.
When driving in a very wide lane, the
sensors may not be able to cover the entire
width of the neighboring lane. Vehicles
driving on the outside of the neighboring
lane may not be detected.
Controls in detail
Z