Mercedes-Benz S 450 4MATIC, Руководство оператора

Страница: 419 / 801

418
Controls in detail
Driving and parking
왘
Press KEYLESS-GO start/stop button
once.
The engine starts if the SmartKey with
KEYLESS-GO is in the vehicle.
For information on turning off the engine
with KEYLESS-GO, see “Turning off the en-
gine” (
컄
page 424).
Starting difficulties
The engine does not start. You can hear
the starter.
There could be a malfunction
앫
in the engine electronics, or
앫
in the fuel supply system
Carry out the following steps:
왘 If you are starting the engine with the
SmartKey: Turn SmartKey in starter
switch to position
0 and repeat starting
procedure (
컄
page 416).
왘
If you are starting the engine with
KEYLESS-GO*: Close any doors that
may be open to allow for better detec-
tion of the SmartKey with
KEYLESS-GO*.
or
왘
Remove the KEYLESS-GO* start/stop
button from starter switch.
왘
Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO*.
왘
Repeat the starting procedure
(
컄
page 416).
If the engine does not start after several
starting attempts:
왘
Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.
The engine does not start. You cannot
hear the starter.
The battery may not be sufficiently
charged.
왘
Have the vehicle jump-started
(
컄
page 734).
If the engine will not start despite a jump
start:
왘
Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.
i
You can also start the engine with the auto-
matic transmission set to neutral position N .
i
If you wish to start the vehicle with the
SmartKey instead of the KEYLESS-GO feature,
remove the KEYLESS-GO start/stop button from
the starter switch and proceed as described in
“Starting with the SmartKey” (
컄
page 417).
!
Remember that extended starting attempts
can drain the battery.
컄컄