Mercedes-Benz S 450 4MATIC, Руководство оператора

Страница: 201 / 801

200
Control systems
COMAND navigation (introduction)
Geo-coordinate display
Illustration: map with geo-coordinate dis-
play switched on
1
Current height above sea level
2
Number of GPS satellites from which
signals for positioning can be received
3
Coordinate display
Display options with geo-coordinate dis-
play switched on
If the crosshair is displayed on the map
view (map was moved manually), only dis-
play
3
is visible.
It shows either the coordinates of the
crosshair or other data on the crosshair
position, e.g. a street name. The digital
map must contain relevant data in order
for this other data to be displayed.
Switching the geo-coordinate display on
or off
왘
Select “ Navi ” “ Navi ” “ Map Dis-
play ”.
The map display list appears.
왘
Select “ Coordinates ”.
The geo-coordinate display is switched
on or off, depending on the previous
status. A checkmark indicates which
status is active.
왘 Exiting menu:
Slide
o m p
or press
back button
L
in the center console
(
컄
page 88).
i
There must be sufficient GPS reception for
displays
1
,
2
and
3
to be shown. Height dis-
play
1
is an approximation because the naviga-
tion system uses the GPS signals for the
calculation.
i
If there is no crosshair on the map view, dis-
plays
1
,
2
and
3
are visible. Display
3
shows the coordinates of the current vehicle po-
sition.