Folding the front seat backrests
forward/back
Important safety notes
G
WARNING
If the backrest is not engaged, it could fold
forwards during a braking maneuver or in the
event of an accident, for example. The seat
backrest will then push the vehicle occupant
against the seat belt. The seat belt can no
longer offer the intended level of protection
and could even cause injuries. There is an
increased risk of injury.
Before each journey, make sure that the back-
rest engages fully as described.
G
WARNING
You could lose control of your vehicle if you do
the following while driving:
R
adjust the driver's seat, steering wheel or
mirrors
R
fasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, steering wheel or
mirrors and fasten your seat belt before start-
ing the engine.
G
WARNING
When you adjust a seat, you or other vehicle
occupants could become trapped, e.g. on the
seat guide rail. There is a risk of injury.
Make sure when adjusting a seat that no one
has any body parts in the sweep of the seat.
Observe the safety notes on "Air bags"
(
Y
page 46) and "Children in the Vehicle"
(
Y
page 57).
Folding the seat backrest forward
With the EASY-ENTRY system, the seat moves
forwards as soon as you fold the backrest for-
wards and pull the seat forwards horizontally.
This makes it easier for passengers to get into
and out of the rear compartment.
The head restraint also lowers on vehicles with
electric seat adjustment.
X
Vehicles without memory function:
release the head restraint if necessary and
push it down.
X
Use seat release handle
:
and fold the back-
rest forwards until the seat backrest engages.
X
Push the seat as far forwards as it will go.
X
Vehicles with memory function: use seat
release handle
:
and fold the backrest for-
wards as far as it will go.
The seat moves automatically to the foremost
position.
Folding the seat backrest back
X
Vehicles without memory function: push
the seat backrest back horizontally until the
seat reaches the position that was previously
set.
X
Fold the seat backrest backwards until you
hear it engage. Do so in a smooth manner.
If the rear seat backrest is not engaged, this
will be shown in the multifunction display in
the instrument cluster. A warning tone also
sounds.
X
After the seat backrest has been folded back,
check the position of the head restraint and
set it to the correct position.
X
Vehicles with memory function: swing
back the seat backrest.
If the rear seat backrest is not engaged, this
will be shown in the multifunction display in
100
Seats
Sea
ts,
steer
ing
wheel
and
mi
rro
rs
Содержание MY17 c-class
Страница 353: ...351 ...
Страница 354: ...352 ...