Mercedes-Benz MY17 c-class, Руководство оператора

Страница: 91 / 354

When you lock the vehicle, you can simultane-
ously:
R
close the side windows
R
close the sliding sunroof or the panorama roof
with power tilt/sliding panel
On vehicles with a panorama roof with power
tilt/sliding panel, you can then close the roller
sunblinds.
Notes on the automatic reversing feature for:
R
the side window (
Y
page 87)
R
the sliding sunroof or the panorama roof with
power tilt/sliding panel (
Y
page 91)
Using the SmartKey
X
Press and hold the & button until the side
windows and the sliding sunroof or the pano-
rama roof with power tilt/sliding panel are
fully closed.
X
Make sure that all the side windows and the
sliding sunroof or panorama roof with power
tilt/sliding panel are closed.
X
Vehicles with panorama roof with power
tilt/sliding panel: press and hold the &
button once more until the roller sunblinds of
the panorama roof with power tilt/sliding
panel close.
X
To interrupt convenience closing: release
the & button.
Using KEYLESS-GO
The driver's door and the door at which the han-
dle is used, must both be closed. The SmartKey
must be outside the vehicle. The gap between
the SmartKey and the corresponding door han-
dle should not be greater than 3 ft (1 m).
X
Touch recessed sensor surface : on the
door handle until the side windows and the
sliding sunroof or the panorama roof with
power tilt/sliding panel are fully closed.
Make sure you only touch recessed sensor
surface : .
X
Make sure that all the side windows and the
sliding sunroof or panorama roof with power
tilt/sliding panel are closed.
X
Vehicles with panorama roof with power
tilt/sliding panel: touch recessed sensor
surface : on the door handle again until the
roller sunblinds of the panorama roof with
power tilt/sliding panel close.
X
To interrupt convenience closing: release
recessed sensor surface : on the door han-
dle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
X
Close all the doors.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Pull the corresponding switch on the door
control panel until the side window is com-
pletely closed (
Y
page 87).
X
Hold the switch for an additional second.
If the side window opens again slightly:
X
Immediately pull the corresponding switch on
the door control panel until the side window is
completely closed (
Y
page 87).
X
Hold the switch for an additional second.
X
If the respective side window remains closed
after the button is released, then it has been
set correctly. If this is not the case, repeat the
steps above.
Side windows
89
Opening
and
closing
Z