Mercedes-Benz Marco Polo 2017, Дополнение к руководству пользователя

Страница: 39 / 96

tabs
?
again. If necessary, repeat the seat
fitting.
X
Move the seat/berth combination to the
desired position and lock into place
(
Y
page 33).
X
Fit the stowage compartments .
Bed extension
Folding up and down
You can fold up the bed extension by 70°.
X
To fold up: pull handle
:
back and fold up
the bed extension.
The bed extension will be held in this position.
Always fold down the bed extension before
starting the journey.
X
To fold down: pull the bed extension down
until it engages.
Removing/fitting
The bed extension is heavy. Have a second per-
son assist you.
X
To remove: fold up the bed extension.
X
Swing levers
:
at both feet of the bed exten-
sion inward.
The bed extension is unlocked.
X
Remove the bed extension from the guide
rails.
X
To fit: align the bed extension over the guide
rails and insert it.
X
Swing the lever outwards.
The bed extension is locked in place.
Rear bench seat
! If you fit an additional rear bench seat in the
direction of travel, its armrest must be
removed from the side of the kitchen cup-
board before installation. Otherwise, the arm-
rest may rub against the kitchen cupboard
and the front panels of the kitchen cupboard
will be damaged. Have the armrest removed
at a qualified specialist workshop.
For the installation of an additional rear bench
seat in the face-to-face position, the armrest
may remain installed (see the vehicle's Operat-
ing Instructions).
Roof bed
Important safety notes
! The roof bed may be loaded up to a maxi-
mum of 200 kg.
! When getting in/out of the roof bed, do not
use the front seat armrest or the middle sec-
tion of the front seat as a step. The armrests
are not designed for such loads and could
break. The sensor system in the front seat
could be damaged. Only step on the stable
edge of the seat.
!
During heavy rain do not lean against the
bellows of the pop-up roof. The bellows and
waterproofing could become damaged and
allow moisture and dampness to enter the
vehicle.
The roof bed sleeps two.
You can climb into the roof bed using a locked
front seat. Only step on the broad and stable
edge of the seat surface and support yourself on
the bed frame.
Roof bed
37
Seats, berths and table
Z