Mercedes-Benz Marco Polo 2017 Скачать руководство пользователя страница 30

Страница: 30 / 96

Starting from basic position

, the seat/berth

combination for passengers can be moved for-

wards or backwards by 5 cm. In doing so, make

sure that passengers have sufficient legroom to

reduce the risk of injury during braking.

Increasing the load compartment capa-

city by positioning the seats outside the

optimum area of protection

The restraint systems, such as airbags and seat

belts, only provide optimum protection when

the seat/berth combination is positioned within

the default markings on the guide rails (optimum

area of protection). It is recommended that the

seat/berth combination is positioned within the

markings on the guide rails.
If you slide the seat/berth combination for-

wards or backwards by more than 5 cm you can

increase the capacity of the load compartment.
If the seat/berth combination is then being used

by passengers, make sure that there is always

sufficient space for the passenger's knees. A

distance of at least 5 cm

between the knees

of the passenger and front seat must be main-

tained so that individuals of various heights are

afforded a minimum level of safety. Always

maintain the minimum distance when the seat/

berth combination is occupied by passengers. If

the minimum distance is not maintained, there

is the risk of injury in the event of an accident or

when braking as a result of the passenger's

head striking the seat in front.

Moving the seat/berth combination

Before you can move the seat/berth combina-

tion, you may have to remove an additional indi-

vidual seat or an additional rear bench seat. This

depends on the vehicle variant and equipment

fitted (see the vehicle's Operating Instructions).

If the seat sliders in the front row of rear seats

are too far back in the guide rails, the seat/berth

combination cannot be moved forward. In this

case, use the handle for the seat sliders

(

page 88), in order to move the seat sliders

(

page 88).

Always keep the seat anchorages in the vehicle

floor free from dirt and foreign objects. You can

thus ensure that the seat/berth combination

engages securely. The standard position is

marked.

If you intend to move the seat/berth combi-

nation into the area of the sliding table, move

the sliding table into the travel position

(

page 39).

Pull lever

up to the stop and hold it.

The seat/berth combination is unlocked.

Grasp the metal bracket of the seat/berth

combination through opening

and move

the seat/berth combination.

Release lever

The locking mechanism engages automati-

cally.

Pull the seat/berth combination and check

the locking mechanism.

Setting up/folding away the berth

WARNING

A vehicle occupant on the bed while the vehi-
cle is in motion cannot be restrained. There is
a risk of serious or even fatal injuries.

Marco Polo seat/berth combination

Seats, berths and table

Содержание Marco Polo 2017

































































































Результаты поиска

Содержание Marco Polo 2017

Отзывы:

Похожие инструкции для Marco Polo 2017

Бренды по названию

Популярные бренды

Mercedes-Benz Marco Polo 2017, Дополнение к руководству пользователя

Результаты поиска

Содержание Marco Polo 2017

Отзывы:

Похожие инструкции для Marco Polo 2017

Бренды по названию

Популярные бренды