Mercedes-Benz GLS 2023, Руководство оператора

Страница: 374 / 538

* NOTE Damage or malfunctions caused by
moisture
Moisture may cause damage to the electrical
system or cause it to malfunction.
#
When the fuse box is open, make sure
that no moisture can enter the fuse box.
#
When closing the fuse box, make sure
that the seal of the lid is positioned cor-
rectly on the fuse box.
If the newly inserted fuse also blows, have the
cause traced and rectified at a qualified specialist
workshop.
Ensure the following before replacing a fuse:
R
The vehicle is secured against rolling away.
R
All electrical consumers are switched off.
R
The vehicle is switched off.
The electrical fuses are located in various fuse
boxes:
R
Fuse box in the engine compartment on the
left-hand side of the vehicle, when viewed in
the direction of travel (
/
page 372)
R
Fuse box on the driver's side of the cockpit
(
/
page 373)
R
Fuse box in the front passenger footwell
(
/
page 373)
R
Fuse box in the cargo compartment on the
right-hand side of the vehicle, when viewed in
the direction of travel (
/
page 373)
Opening and closing the fuse box in the engine
compartment
Requirement
R
You need a dry cloth and a screwdriver.
Observe the notes on electrical fuses
(
/
page 371).
Opening
&
WARNING Risk of injury from using the
windshield wipers when the hood is open
If the windshield wipers start moving when the
hood is open, you could be trapped by the
wiper linkage.
#
Always switch off the windshield wipers
and vehicle before opening the hood.
#
Remove any existing moisture from the fuse
box using a dry cloth.
#
Loosen screws 2 and remove fuse box lid 1
from the top.
372 Breakdown assistance