Mercedes-Benz GLE 350 4MATIC 2020, Руководство оператора

Страница: 521 / 650

#
Press the wheel firmly against the
wheel hub when screwing on the first
wheel bolt.
#
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated until they are
finger-tight.
#
If the collapsible spare wheel has been
installed, inflate the collapsible spare wheel
(
/
page 523).
#
Lower the vehicle (
/
page 519).
Lowering the vehicle after a wheel change
Requirements:
R
The new wheel has been installed
(
/
page 518).
Observe the information on tire pressure
(
/
page 492).
#
Place the ratchet wrench onto the hexagon
nut of the jack so that the lettering "AB" is
visible.
#
To lower the vehicle: turn the ratchet
wrench of the jack counter-clockwise.
#
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated 1 to 5 with
a maximum of 59 lb-ft (80 Nm).
#
Then tighten the wheel bolts evenly in a diag‐
onal pattern in the order indicated 1 to 5
to the specified tightening torque of 111 lb-ft
(150 Nm).
& WARNING Risk of injury through incor‐
rect tightening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened to the
prescribed tightening torque.
#
Make sure the wheel bolts or wheel
nuts are tightened to the prescribed
tightening torque.
#
If you are not sure, do not move the
vehicle. Consult a qualified specialist
workshop and have the tightening tor‐
que checked immediately.
#
Check the tire pressure of the newly moun‐
ted wheel and adjust accordingly.
#
Vehicles with tire pressure loss warning
system: Restart the tire pressure loss warn‐
ing system (
/
page 498).
Exception: the new wheel is an emergency
spare wheel.
Wheels and tires 519