Mercedes-Benz GLE 350 4MATIC 2020, Руководство оператора

Страница: 478 / 650

#
Observe the maximum permissible speed for
a tire sealed with tire sealant 50 mph
(80 km/h).
#
Affix the upper section of the TIREFIT sticker
to the instrument cluster in a location where
it will be easily seen by the driver.
* NOTE Staining caused by leaking tire
sealant
After use, excess tire sealant may leak out
from the filling hose.
#
Therefore, place the filling hose in the
plastic bag that contained the TIREFIT
kit.
+
ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre‐
sponsible disposal
Tire sealant contains pollutants.
#
Have the tire sealant bottle disposed of
professionally, e.g. at an authorized
Mercedes-Benz Center.
#
Stow the tire sealant bottle and the tire infla‐
tion compressor.
#
Pull away immediately.
#
Stop driving after approximately ten minutes
and check the tire pressure using the tire
inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
& WARNING Risk of accident due to the
specified tire pressure not being reached
If the specified tire pressure is not reached
after a brief drive, the tire is too badly dam‐
aged. The tire sealant cannot repair the tire
in this instance.
Damaged tires and tire pressure that is too
low can significantly impair the braking prop‐
erties and the handling characteristics.
#
Do not continue driving.
#
Consult a qualified specialist workshop.
In cases such as the one mentioned above, con‐
tact an authorized Mercedes-Benz Center. Or
call 1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
#
To increase the tire pressure: switch on
the tire inflation compressor.
#
To reduce the tire pressure: press pressure
release button 1 next to manometer 2 .
#
When the tire pressure is correct, unscrew
the filling hose from the valve of the sealed
tire.
#
Screw the valve cap onto the valve of the
sealed tire.
476 Breakdown assistance