Mercedes-Benz GLE 350 4MATIC 2020, Руководство оператора

Страница: 517 / 650

Setting up the folding chock
Preparing the vehicle for a wheel change
Requirements:
R
The required tire-change tool kit is available.
If your vehicle is not equipped with the tire-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
R
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
ground.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Vehicles with automatic transmission:
Shift into position
j
.
#
Vehicles with level control system: Set the
normal vehicle level (
/
page 231).
#
Switch off the engine.
#
Make sure that the engine cannot be started.
#
Place chocks or other suitable items under
the front and rear of the wheel that is diago‐
nally opposite the wheel you wish to change.
#
Raise the vehicle (
/
page 516).
Removing and installing hub caps
Requirements:
R
The vehicle is prepared for a wheel change
(
/
page 515).
Plastic hub cap
#
To remove: turn the center cover of the hub
cap counter-clockwise and remove the hub
cap.
#
To install: make sure that the center cover
of the hub cap is turned counter-clockwise.
#
Position the hub cap and turn the center
cover clockwise until the hub cap engages
physically and audibly.
Aluminum hub cap
#
To remove: position socket 2 on hub cap
1 .
Wheels and tires 515