Mercedes-Benz GLC 300, Руководство оператора

Страница: 349 / 462

#
Pull filler hose 2 and plug 4 out of the tire
inflation compressor housing.
#
Insert plug 8 of filler hose 2 in the socket
on the tire inflation compressor and then
turn it until plug 8 engages.
#
Unscrew the cap from the valve on the emer‐
gency spare wheel.
#
Screw union nut 3 of filler hose 2 onto the
valve.
#
Make sure on and off switch 5 of the tire
inflation compressor is set to 0.
#
Insert plug 4 in a socket in your vehicle.
R
Cigarette lighter socket
R
Observe the notes on the cigarette lighter in
the Digital Operator's Manual
#
Turn the SmartKey to position 1 in the igni‐
tion lock.
#
Press on and off switch 5 on the tire infla‐
tion compressor to I.
The tire inflation compressor is switched on.
The tire is inflated. The tire pressure is
shown on manometer 6 .
#
Pump the tire to the specified tire pressure.
% The specified tire pressure is stated on the
label of the emergency spare wheel.
#
When the specified tire pressure has been
reached, press on and off switch 5 on the
tire inflation compressor to 0.
The tire inflation compressor is switched off.
#
Turn the SmartKey to position g in the igni‐
tion lock.
#
If the tire pressure is higher than the speci‐
fied pressure, press pressure release valve
button 7 until the correct tire pressure has
been reached.
#
Unscrew union nut 3 of filler hose 2 from
the valve.
#
Screw the valve cap of the emergency spare
wheel onto the valve again.
#
Store filler hose 2 and plug 4 in the lower
section of the tire inflation compressor hous‐
ing.
#
Store the tire inflation compressor in the
vehicle.
Wheels and tires 347