Mercedes-Benz GLC 300, Руководство оператора

Страница: 308 / 462

Observe the additional following points during
starting assistance:
R
Starting assistance may only be provided
using vehicles, batteries or other jump start
devices with a nominal voltage of 12 V.
R
The vehicles must not touch.
R
Vehicles with a gasoline engine: Jump
start the vehicle only when the engine and
exhaust system are cold.
Starting assistance and charging the 12 V
battery
Requirements:
R
The vehicle is secured with the electric park‐
ing brake.
R
Vehicles with automatic transmission:
The transmission is in position j .
R
The ignition and all electrical consumers are
switched off.
R
The hood is open.
Example: engine compartment
#
Slide cover 1 of positive clamp 2 on the
jump-starting connection point in the direc‐
tion of the arrow.
#
Connect positive clamp 2 on your vehicle to
the positive pole of the donor battery using
the jumper cable/charging cable. Always
begin with positive clamp 2 on your own
vehicle first.
#
During starting assistance: start the
engine of the donor vehicle and run at idle
speed.
#
Connect the negative pole of the donor bat‐
tery and ground point 3 of your own vehicle
by using the jumper cable/charging cable.
Begin with the donor battery first.
#
During starting assistance: start the
engine of your own vehicle.
#
During the charging process: start the
charging process.
#
During starting assistance: let the engines
run for several minutes.
#
During starting assistance: before discon‐
necting the jumper cable, switch on an elec‐
trical consumer in your own vehicle, e.g. the
rear window heater or lighting.
When the starting assistance/charging process
is complete, perform the following steps:
306 Breakdown assistance