Mercedes-Benz G-Class, Руководство пользователя

Страница: 139 / 208

24 V interface (panel van / station
wagon)
! If accessories are connected, make sure
that a maximum current draw of 40 A is not
exceeded. Otherwise, you will overload the
fuse.
You can use the 24 V interface for additional
consumers with a maximum power consump-
tion of 960 W.
X
Unscrew cover cap
:
.
Winch socket
G
WARNING
Only use the winch when the vehicle is sta-
tionary. Make sure that:
R
the winch is attached properly
R
the vehicle is properly secured against roll-
ing away
Always observe the notes on operation and
safety in the operating instructions of the
winch manufacturer.
The winch socket is located at the front on
the right-hand side under the bumper.
i If the engine is switched off, only use the
winch briefly. The battery may otherwise
discharge.
X Unscrew cover
:
of winch socket
;
anti-
clockwise and fold it to one side.
The winch socket is deactivated. You must
activate it before use.
i Use the adapter plug of the winch cable if
necessary.
X
To activate: press the upper section of
switch
:
.
The indicator lamp in switch
:
lights up.
X To deactivate: press the lower section of
switch
:
.
Indicator lamp in the
:
switch goes out.
Walk-on bonnet
! Do not exceed a load of 120 kg on the
bonnet. Only walk on the bonnet when it is
closed and locked. You could otherwise
damage the bonnet.
i The bonnet is reinforced so that it can
take your weight. The area with the rough-
ened surface provides better grip.
i
The walk-on bonnet can be used for better
access to the roof rack, for instance.
Features
137
Stowing and features
Z