Mercedes-Benz G-Class, Руководство пользователя

Страница: 63 / 208

X
Make sure that the
L
dipped-beam
headlamps (
Y
page 59) or the
N
fog-
lamp (
Y
page 60) is switched on.
X
To switch on: press the upper section of
the switch.
The
Q
indicator lamp in the instrument
cluster lights up.
X
To switch off: press the lower section of
the switch.
Indicator lamp
Q
goes out.
Adjusting the headlamp range
! The permissible load depends on the
respective vehicle body type.
Headlamp range control
The headlamp range control allows you to
adjust the cone of light from the headlamps
to suit the vehicle load.
X
Turn the headlamp range control to the cor-
responding position.
i The luggage compartment or the load
area may only be loaded to the maximum
load. The permissible rear axle load must
not be exceeded (
Y
page 201).
Panel van, chassis cab
g Front seats occupied
1
Front seats occupied, load in luggage
compartment/on load area
2
Driver's seat occupied, load in luggage
compartment/on load area
Station wagon
g
Front seats occupied
1
Front seats and rear bench seat occu-
pied
2
Front seats and rear bench seat occu-
pied, load in luggage compartment
3
Driver's seat occupied, load in the lug-
gage compartment
Headlamp cleaning system
X
Turn the ignition key to position 2 in the
ignition lock or start the engine.
X
To switch on: activate the "Wipe with
washer fluid" function (
Y
page 73).
The headlamps are cleaned with a high-
pressure water jet.
Hazard warning lamps
Switching on and off
X
Make sure that the battery main switch is
switched on.
X
To switch on: press the lower section of
the switch.
All turn signals flash.
X To switch off: press the upper section of
the switch.
i The hazard warning lamps still operate if
the ignition is switched off. The hazard
warning lamp does not work, however, if a
blackout lighting setting has been selected
(
Y
page 59).
Exterior lighting
61
Lights and windscreen wipers
Z