Mercedes-Benz EQS Saloon 2021, Руководство пользователя

Страница: 480 / 645

Preparing the vehicle for a wheel change
Requirements:
R
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
ground.
R
The required tyre-change tool kit is available.
%
If your vehicle is not equipped with the tyre-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Shift the transmission to position
j
.
#
Vehicles with level control system: set the nor-
mal vehicle level (
/
page 302).
#
Switch off the vehicle.
#
Make sure that the vehicle cannot be started.
#
Place chocks or other suitable items under the
front and rear of the wheel that is diagonally
opposite the wheel you wish to change.
#
Remove the hub cap if necessary
(
/
page 477).
#
Raise the vehicle (
/
page 478).
Removing and fitting the wheel trim/hub caps
Requirements:
R
The vehicle is prepared for a wheel change
(
/
page 477).
Aluminium hub cap
#
To remove: position socket 2 from the tyre-
change tool kit on hub cap 1 .
#
Position wheel spanner 3 on socket 2 .
#
Using wheel spanner 3 , turn hub cap 1
anti-clockwise and remove it.
#
To fit: follow the instructions above in reverse
order.
% Specified tightening torque: 25 Nm.
Wheels and tyres 477