Mercedes-Benz EQS Saloon 2021, Руководство пользователя

Страница: 225 / 645

adapt your speed to the driving conditions and
keep a sufficient distance.
The recuperative brake system has the following
characteristics:
R
supports braking with electronically controlled
brake force boosting
R
converts the kinetic energy of the vehicle into
electric energy
%
If you brake hard, the mechanical brake is
also used. This means that the maximum
recuperative energy cannot be recovered. The
more you drive and brake in an anticipatory
manner, the more efficiently energy can be
recuperated.
System limits
The braking effect of the electric motor during
recuperation in overrun mode may be reduced or
may not be available at all in the following situa-
tions:
R
when the high-voltage battery charge level
increases
R
if the high-voltage battery is not yet at a nor-
mal operating temperature
In these cases, the desired deceleration is set by
the brake control system.
Manually setting recuperative deceleration
%
You can use the steering wheel gearshift pad-
dles to adjust the intensity of recuperation in
drive programs
n
,
o
and
Î
.
The following recuperation levels are available:
R
h Ã
Intelligent and anticipatory recupera-
tion with ECO Assist (
/
page 220, 223)
R
hq
No recuperation: the vehicle rolls freely
R
h
Normal recuperation
R
h
±
Increased recuperation: strong deceler-
ation in overrun mode, e.g. for driving on
downhill gradients
Standard setting:
R
h
Ã
: if the ECO Assist function is activa-
ted in the multimedia system (
/
page 224).
R
h
: if the ECO Assist function is deactivated
in the multimedia system.
%
h Ã
is only available if the ECO Assist
function is activated in the multimedia system
and if the function of the radar sensors is not
impaired. Also observe the information on
vehicle sensors and cameras (
/
page 264).
#
To increase recuperation: briefly pull gearshift
paddle 1 .
#
To reduce recuperation: briefly pull gearshift
paddle 2 .
#
Standard setting: pull and hold gearshift pad-
dle 1 or 2 or engage transmission position
h
again.
%
When the vehicle is started again, the stand-
ard setting is also set.
222 Driving and parking