Mercedes-Benz EQS Saloon 2021, Руководство пользователя

Страница: 451 / 645

#
Affix part
1
of the TIREFIT sticker to the
instrument cluster within the driver's field of
vision.
#
Affix part 2 of the TIREFIT sticker near the
valve on the wheel with the defective tyre.
#
Pull plug 6 with the cable and hose 5 out
of the tyre inflation compressor housing.
#
Push the plug of hose
5
into flange
4
of
tyre sealant bottle
3
until the plug engages.
#
Place tyre sealant bottle 3 head downwards
into recess 2 of the tyre inflation compres-
sor.
#
Remove the valve cap from valve 7 on the
faulty tyre.
#
Screw filling hose 8 onto valve 7 .
#
Insert plug into 6 a 12‑V‑ socket in your vehi-
cle.
#
Switch on the ignition.
#
Switch on the tyre inflation compressor using
On/Off switch 1 .
The tyre is inflated. First, tyre sealant is pum-
ped into the tyre. The pressure may briefly rise
to approximately 500 kPa (5 bar/73 psi).
Do not switch off the tyre inflation compressor
during this phase!
#
Let the tyre inflation compressor run for a
maximum of ten minutes.
The tyre should then have attained a tyre pres-
sure of at least 200 kPa (2.0 bar/29 psi).
If tyre sealant leaks out, make sure you clean the
affected area as quickly as possible. It is prefera-
ble to use clean water.
If you get tyre sealant on your clothing, have it
cleaned as soon as possible with perchloroethy-
lene.
If, after ten minutes, a tyre pressure of 200 kPa
(2.0 bar/29 psi) has not been attained:
#
Switch off the tyre inflation compressor.
#
Unscrew the filling hose from the valve of the
defective tyre.
448 Breakdown assistance