Mercedes-Benz E 500, Руководство пользователя

Страница: 36 / 140

Important!
Prior to operating the vehicle, the
driver should adjust the seat
height for proper vision as well as
fore/aft placement and seat back
angle to insure adequate control,
reach, operation, and comfort. The
head restraint should also be
adjusted for proper height.
Both the inside and outside rear
view mirrors should be adjusted
for adequate rearward vision.
Fasten seat belts. Infants and
small children should be seated in
a properly secured restraint
system that complies with U.S.
Federal Motor Vehicle Safety
Standard 213 and Canadian Motor
Vehicle Safety Standard 213.1.
All seat, head restraint, and rear
view mirror adjustments as well as
fastening of seat belts should be
done before the vehicle is put into
motion.
Orthopedic Seat Backrest
1 Pressure regulator
2 Height regulator
Some models may be equipped
with orthopedic seats. These seats
have inflatable air cushions built
into the backrest to provide
additional lumbar support. The
amount of cushion height and
curvature may be adjusted after
turning the key in steering lock to
position 1 or 2.
The inflation pressure of the air
cushion can be varied continuous­
ly between position ” 0 ” = without
pressure, and position ” 4 ” =
maximum pressure, by changing
the pressure regulator (1) setting.
In addition, the cushion height
may be changed to five different
settings between position ” a ” =
lowest setting, and ” e ” = highest
setting, by varying the height
regulator (2) adjustment.
If the engine is turned off, the last
cushion setting is retained in
memory, and automatically ad­
justs the cushion to this setting
when the engine is restarted.
34