Mercedes-Benz E 320 BLUETEC, Руководство оператора

Страница: 52 / 522

51
Getting started
Driving
왘
Place the shoulder portion of the seat
belt across the top of your shoulder
and the lap portion across your hips.
왘
Push latch plate
2
into buckle
3
until
it clicks.
왘
If necessary, tighten the lap portion to
a snug fit by pulling shoulder portion
up.
Belt outlet height adjustment
1
Release button
왘
Press release button
1
and move the
seat belt height adjuster upward or
downward.
Proper use of seat belts
앫
Do not twist the seat belt when fasten-
ing.
앫
Adjust seat belt so that the shoulder
portion is located as close as possible
to the middle of the shoulder (it should
not touch the neck). Never pass the
shoulder portion of the seat belt under
your arm.
앫
Position the lap belt as low as possible
on your hips (over hip joint) and not
across the abdomen.
앫
Place the seat backrest in a nearly
upright position.
앫
Never use a seat belt for more than one
person at a time.
앫
Do not fasten a seat belt around a
person and another object at the same
time. When using a seat belt to secure
infant restraint or toddler restraint or
children in booster seats, always follow
the child seat manufacturer’s instruc-
tions.
앫
Check your seat belt periodically
during travel to make sure that it is
properly positioned.
앫
Make sure that the seat belt is always
fitted snugly. Take special care of this
when wearing loose clothing.
Warning!
G
Do not pass seat belts over sharp edges.
They could tear.
Do not allow the seat belt to get caught in
the door or in the seat adjustment mecha-
nism. This could damage the seat belt.
Never attempt to make modifications to
seat belts. This could impair the effective-
ness of the seat belts.
Do not bleach or dye seat belts as this may
severely weaken them. In a crash they may
not be able to provide adequate protection.
Damaged seat belts or seat belts that were
highly stressed in an accident must be re-
placed. Contact an authorized
Mercedes-Benz Center.