Mercedes-Benz E 320 BLUETEC, Руководство оператора

Страница: 329 / 522

328
Operation
Engine compartment
Checking engine oil level
When checking the oil level
앫
the vehicle must be parked on level
ground
앫
with the engine at operating tempera-
ture, the vehicle must have been sta-
tionary for at least 5 minutes with the
engine turned off
앫
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 5 minutes
with the engine turned off
1
Oil dipstick
2
Upper (max) mark
3
Lower (min) mark
To check the engine oil level with the oil
dipstick, do the following:
왘
Open the hood (
컄
page 325).
왘
Pull out oil dipstick
1
.
왘
Wipe oil dipstick
1
clean.
왘
Fully insert oil dipstick
1
into the
dipstick guide tube.
왘
Pull out oil dipstick
1
again after
approximately 3 seconds to obtain ac-
curate reading.
The oil level is correct when it is be-
tween the lower (min) mark
3
and
upper (max) mark
2
of oil dipstick
1
.
왘
If necessary, add engine oil.
For adding engine oil, see “Adding engine
oil”.
For more information on engine oil, see
“Fuels, coolants, lubricants etc.”
(
컄
page 491).
For more information on messages in the
multifunction display concerning engine
oil, see the “Practical hints” section
(
컄
page 418).
i
All models (except E 63 AMG):
The filling quantity between the upper and lower
marks on the oil dipstick is approximately
2.1 US qt. (2.0 l).
E 63 AMG:
The filling quantity between the upper and lower
marks on the oil dipstick is approximately
1.6 US qt. (1.5 l).