Mercedes-Benz E 320 BLUETEC, Руководство оператора

Страница: 140 / 522

139
Controls in detail
Lighting
Daytime running lamp mode
왘
Turn the exterior lamp switch to
position
M
or
U
.
When the engine is running, the low
beam headlamps are automatically
switched on.
In low ambient light conditions, the fol-
lowing lamps will switch on additional-
ly:
앫
Tail and parking lamps
앫
License plate lamps
앫
Side marker lamps
Canada only:
The daytime running lamp mode is manda-
tory and therefore in a constant mode.
When the engine is running, and you shift
from a driving position to position
N or P ,
the low beam headlamps will switch off
with a 3 minute delay.
When the engine is running, and you
앫
turn the exterior lamp switch to
position
C
, the parking lamps and
the side marker lamps switch on addi-
tionally.
앫
turn the exterior lamp switch to
position
B
, the manual headlamp
mode has priority over the daytime run-
ning lamp mode.
The corresponding exterior lamps
switch on (
컄
page 137).
i
With the daytime running lamp mode activat-
ed and the engine running, you cannot switch off
the low beam headlamps manually.
i
With the exterior lamp switch in
position
M
or
U
, you cannot switch on the
high beam headlamps.
The high beam flasher is available at all times.
For nighttime driving turn the exterior lamp
switch in position
B
to permit activation of
the high beam headlamps.