Mercedes-Benz Conecto, Руководство пользователя

Страница: 163 / 268

Transmission shift systems
Gearshift positions of the 3-pushbutton switch panel
Gearshift positions of the 3-
pushbutton switch panel
Note:
Precondition: pushbutton “N” pressed,
bus stationary, service brake applied, ac-
celerator pedal released (engine speed <
900 rpm).
Note:
Each button lights up when pressed.
Caution:
If the pressed button begins to flash, this
is a warning that there is a severe risk
of transmission damage (limited system
monitoring). In this event, it is permitted
to drive on to the nearest workshop but
only with the engine under partial load.
Caution:
Observe the towing guidelines if the
transmission is damaged.
The towing guidelines are described in
the general information section.
M54_00-1331-71
Press switch “R”.
The automatic transmission shifts to
reverse gear.
Danger.
Risk of accident. Do not shift into reverse
gear unless the bus is stationary and the
engine is running at idling speed.
Note:
It is necessary to press the “N” button
first if button “D” is pressed after but-
ton “R” or if button “R” is pressed after
button “D”.
Note:
During reverse travel, a warning tone will
sound if this feature has been requested
by the customer or stipulated by national
regulations.
CONECTO (C628.3--)/08.2007 GB
153