Mercedes-Benz CLS 2012, Руководство пользователя

Страница: 351 / 405

Example: CLS Coupé, towing eye covers
Towing eye covers (AMG vehicles)
The mountings for the removable towing eyes
are located in the bumpers. They are at the
front and at the rear, under the covers.
X
Remove the towing eye from the vehicle
tool kit (
Y
page 335).
X
Pull cover : out of the bumper in the
direction of the arrow by inserting your fin-
gers into the recess.
X
Press the mark on cover ; inwards in the
direction of the arrow.
X
Take cover ; off the opening.
X
Screw the towing eye in clockwise to the
stop and tighten it.
Removing the towing eye
X
Loosen the towing eye and unscrew it.
X
Position the top of cover : in the bumper
and press it in at the bottom until it
engages.
X
Attach cover ; to the bumper and press
until it engages.
X
Place the towing eye in the vehicle tool kit.
Towing the vehicle with the rear axle
raised
!
The ignition must be switched off if you
are towing the vehicle with the rear axle
raised. Intervention by ESP ® could other-
wise damage the brake system.
Only possible on vehicles without
4MATIC.
X
Switch on the hazard warning lamps
(
Y
page 118).
X
Turn the key in the ignition lock to position
0 and remove the key from the ignition
lock.
X
When leaving the vehicle, take the key or
the KEYLESS-GO key with you.
When towing your vehicle with the rear axle
raised, it is important that you observe the
safety instructions (
Y
page 346).
Towing the vehicle with both axles on
the ground
It is important that you observe the safety
instructions when towing away your vehicle
(
Y
page 346).
348
Towing and tow-starting
Breakdown
assistance