Mercedes-Benz CLS 2012, Руководство пользователя

Страница: 121 / 405

X
To switch on the main-beam head-
lamps: turn the key in the ignition lock to
position 2 or start the engine.
X
Turn the light switch to L or à .
X
Press the combination switch beyond the
pressure point in the direction of
arrow : .
In the à position, the main-beam head-
lamps are only switched on when it is dark
and the engine is running.
The blue
K indicator lamp in the instru-
ment cluster lights up when the main-beam
headlamps are switched on.
X
To switch off the main-beam head-
lamps: move the combination switch back
to its normal position.
The blue K indicator lamp in the instru-
ment cluster goes out.
i
Vehicles with Adaptive Highbeam Assist:
when Adaptive Highbeam Assist is active,
it controls activation of the main-beam
headlamps (
Y
page 120).
Headlamp flasher
:
Main-beam headlamps
;
Turn signal, right
= Headlamp flasher
?
Turn signal, left
X
To switch on: turn the key in the ignition
lock to position 1 or 2, or start the engine.
X
Pull the combination switch in the direction
of arrow = .
Hazard warning lamps
X
To switch on the hazard warning lamps:
press button : .
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the corre-
sponding side of the vehicle will flash.
X
To switch off the hazard warning
lamps: press button : .
The hazard warning lamps automatically
switch on if:
R
an airbag is deployed.
R
the vehicle decelerates rapidly from a
speed of more than 70 km/h and comes to
a standstill.
The hazard warning lamps switch off auto-
matically if the vehicle reaches a speed of
over 10 km/h again after a full brake appli-
cation.
i
The hazard warning lamps still operate if
the ignition is switched off.
Headlamp cleaning system
The headlamps are cleaned automatically if
the "Wipe with washer fluid" function is oper-
ated five times (
Y
page 125) while the lights
are on and the engine is running. When you
switch off the ignition, the automatic head-
lamp cleaning system is reset and counting is
resumed from 0.
118
Exterior lighting
Light
s
and
windscr
een
wiper
s