Mercedes-Benz C-Class, Руководство пользователя

Страница: 477 / 489

Petrol engines: in certain countries, differ-
ent engine oils can be used, provided that the
maintenance intervals are reduced. For more
information, please contact a qualified spe-
cialist workshop.
Petrol engines MB Approval
All models
229.5
Diesel engines with a
diesel particle filter
MB Approval
C 180 BlueTEC
C 200 BlueTEC
226.51,
229.31,
229.51, 229.52
All other models 228.51,
229.31,
229.51, 229.52
Diesel engines without
a diesel particle filter
MB Approval
All models
228.3, 228.5,
228.51, 229.3,
229.31, 229.5,
229.51
i
If the engine oils listed in the table are not
available, you may add the following engine
oils until the next oil change:
R
vehicles with a petrol engine: MB
Approval 229.1, 229.3 or ACEA A3
R
vehicles with a diesel engine: MB
Approval 229.1, 229.3, 229.5 or ACEA
C3
This must only be added once and the
amount must not be greater than 1.0 l.
Capacities
The following values refer to an oil change,
including the oil filter.
Petrol engines Replacement
amount
All models
7.0 l
Diesel engines Replacement
amount
C 180 BlueTEC
C 200 BlueTEC 6.5 l
All other models
6.0 l
Additives
!
Do not use any additives with the engine
oil. This could damage the engine.
Engine oil viscosity
Viscosity describes the flow characteristics
of a fluid. If an engine oil has a high viscosity
rating, it flows slowly; the lower the viscosity,
the faster it flows.
Engine oil selection is based on the respective
outside temperatures and in accordance with
the SAE classification (viscosity). The table
shows you which SAE classifications are to be
used. The low-temperature properties of
engine oils can be significantly impaired dur-
ing operation due to, for example, ageing or
soot and fuel accretion. It is therefore
strongly recommended to observe regular oil
changes using an approved engine oil with the
appropriate SAE classification.
474
Service products and capacities
Tec
hni
cal
data