Mercedes-Benz C-Class, Руководство пользователя

Страница: 444 / 489

X
Put hub cap : in position and turn the
centre cover clockwise until you feel and
hear hub cap : engage.
X
Make sure that hub cap : is fitted
securely.
Light-alloy wheel with aluminium hub cap
Vehicles with aluminium hub cap:
X
To remove: take socket ; and wheel
wrench = from the vehicle tool kit
(
Y
page 407).
X
Position socket ; on hub cap : .
X
Attach wheel wrench = to socket ; and
loosen hub cap : anti-clockwise.
X
Remove hub cap : .
X
To fit: before fitting, check hub cap : and
the wheel area for soiling and clean if nec-
essary.
X
Put hub cap : in position and turn until it is
in the right position.
X
Position socket ; on hub cap : .
X
Attach wheel wrench = to socket ; and
tighten hub cap : .
The tightening torque must be 25 Nm.
i Note that the hub cap should be tight-
ened to the specified torque of 25 Nm.
Mercedes-Benz recommends that you have
the hub cap fitted at a qualified specialist
workshop.
X
Using wheel wrench = , loosen the bolts on
the wheel you wish to change by about one
full turn. Do not unscrew the bolts com-
pletely.
The jacking points are located just behind the
front wheel arches and just in front of the rear
wheel arches (arrows).
Vehicles with AMG equipment: to protect
the vehicle body, the vehicle has covers fitted
next to the jacking points on the outer sills.
X
Vehicles with AMG equipment: fold
cover ? upwards.
Changing a wheel
441
Wheels
and
tyres
Z