Mercedes-Benz B-Class, Руководство пользователя

Страница: 210 / 537

The permissible limit values are in uenced by
the following factors:
R
the power supply system and the charging
cable are not damaged
R
the instructions for handling the charging
cable and the control element on the
charging cable have been observed
#
If the charging cable or charging cable
connector becomes too hot, have the
power supply system checked.
* NNOOTE TE Damaged or dirty vehicle socket
when the socket ap is open
#
Always keep the socket cover and the
socket ap closed when there is no
charging cable connected. This protects
the vehicle socket from dirt and damage.
#
Make sure that the socket cover is
closed properly before closing the socket
ap. This can otherwise result in damage
which may prevent the socket ap from
being opened again.
* NNOOTE TE Damage to the vehicle socket or the
charging cable connector due to incorrect
handling
Do not use excessive force (maximum 300 N)
to insert the charging cable connector into the
vehicle socket to the stop. You may otherwise
damage the vehicle socket, the charging cable
connector or their contacts.
#
If you feel there is increased resistance,
pull the charging cable connector out of
the socket and reinsert it.
RReq equir uirements: ements:
R
The transmission is in position j .
R
The vehicle is unlocked or the distance
between the key and the vehicle does not
exceed 1 m.
R
The vehicle is switched o . The õ display
in the Instrument Display is o .
R
The charging cable is not taut.
Depending on the vehicle's equipment and on the
national version, your vehicle is equipped with one
of the following vehicle sockets:
R
Type 1 for charging with alternating current
(mode 2 or 3)
R
Combo 1 for charging with alternating current
(mode 2 or 3) and charging with direct current
(mode 4)
R
Type 2 for charging with alternating current
(mode 2 or 3)
R
Combo 2 for charging with alternating current
(mode 2 or 3) and charging with direct current
(mode 4)
Driving and parking 207 207