Electrical System
Replacing Bulbs:
Bulbs for turn signal, standing, side
marker and parking lamps (11):
Turn lamp holder with bulb to the left
and remove. Depress bulb, turn to
the left and take out.
Sealed-beam Unit/Halogen (7):
Loosen securing screw (5) and pull
housing out of bracket. Then loosen
securing screws (6) and remove
front cover. Remove securing
screws (8) from retaining frame and
take out sealed-beam unit. Pull off
connector.
Bulb for Fog Lamp (9):
Loosen securing screw (5) and pull
housing out of bracket. Then loosen
securing screws (6) and remove
front cover. Remove securing
screws (10) and take out lamp
holder. Pull of plug connector (12).
Disengage retaining spring (13) and
take out bulb.
Tail Lamp Assemblies
1
Side marker lamp
2 Turn signal lamp
3 Stop lamp
4 Tail, parking and standing lamp
5 Backup lamp
Turn both locks in the trunk to the
left as far as the stop and detach
lamp bracket. To replace the bulbs,
depress, turn to the left and remove.
9304
License Plate Lamps
Loosen both the securing screws
(1) and take out lamp.
Содержание 380 SEL 126 1981
