Mercedes-Benz 380 SEL 126 1981, Руководство пользователя

Страница: 26 / 89

Controls
Combination Switch
1 Low beam (turn lighting switch
clockwise two notches)
2 High beam (turn lighting switch
clockwise two notches)
3 Headlamp flasher (high beam
available independent of lighting
switch position)
4 Turn signals, right
5 Turn signals, left
To operate the turn signals, move
the combination switch past the
point of resistance (up or down). The
switch is automatically cancelled
when the steering wheel is turned
by a large enough angle.
To signal minor directional changes
of the vehicle, such as changing
lanes on a highway, move combina­
tion switch to the point of resistance
only and hold it there.
6 Control for windshield washer
system
When the washer system is
switched on, the wipers also
operate
7 Windshield wiper control
0 Windshield wiper switched off
1 Intermittent wiping
II Normal wiper speed
III High wiper speed
Hints:
If one of the turn signals fails, the
turn signal indicator system flashes
and sounds at a faster sequence
than under normal operating condi­
tions.
Fog lamps will only operate together
with low beam headlamps. Fog
lamps are turned off automatically
when lighting switch is returned to
off-position.
For the overload protection for the
windshield wiper motor, see page 71.