Mercedes-Benz 380 SEL 126 1981, Руководство пользователя

Страница: 27 / 89

Controls
8623
Cruise Control
Any given speed above approxima­
tely 40 km/h/25 mph can be main­
tained with the cruise control by
operating the switch.
1 = Setting (touch switch)
Accelerating (hold switch)
2 = Setting (touch switch)
Decelerating (hold switch)
Normally the vehicle is acceler­
ated to the desired speed with
the accelerator. Speed is set
by briefly pushing the switch
to position “1” or “2”, and the
accelerator can be released.
The speed can be increased
(e.g. for passing) by using the
accelerator. As soon as the
accelerator is released, the
previously set speed will be
resumed automatically.
If a set speed is to be incre­
ased or decreased slightly,
e.g. to adapt to the traffic flow,
retain switch in position “1” or
“2” until the desired speed is
reached. When the switch is
released, the newly set speed
remains.
= Cancelling
To cancel the cruise control,
briefly push lever to position 3.
The cruise control will also be
canceled if the brake pedal is
actuated or if the vehicle
speed drops below 40 km /h/
25 mph.
4 = Resume
If the lever is briefly pushed to
position “4” when driving at a
speed exceeding approxi­
mately 40 km/h/25 mph, that
speed is resumed which was
set prior to the cancellation of
the cruise control. The last
memorized speed is cancelled
when the key in the steering
lock is turned to position “ 1 ”
or “0” .
Important:
Please do not use the cruise control
if traffic conditions do not make it
advisable to maintain a steady
speed, i.e. in heavy traffic or on twis­
ting or slick and muddy roads.
Position “ Resume” should be
engaged only if the driver is fully
aware of the previously set speed
and wishes to resume this particular
preset speed.
When driving with the cruise control,
the selector lever must not be
shifted to position “ N” as otherwise
the engine will overrev.
25