Mercedes-Benz 300 SDL turbo 126 D, Руководство пользователя

Страница: 31 / 113

Adjusting Power Seats, Front
The switches are located in each front
door.
Turn key to steering lock position 1
or 2 (with the driver’s or front
passenger’s door opened, the power
seats can also be operated with the
key removed or in steering lock
position 0).
Seat and head restraint adjustment:
A Seat cushion adjustment.
B Seatback adjustment.
C Head restraint adjustment.
Adjust head restraint to support
the back of the head approxi­
mately at ear level. The head res­
traint can also be turned forward
by hand.
Note:
Your car is equipped with power
head restraints, do not try to oper­
ate manually.
Warning!
Do not adjust the driver’s seat while
driving. Adjusting the seat while
driving could cause the driver to
lose control of the vehicle.
Never ride in a moving vehicle with
the seat back reclined. The seat
back and seat belts provide the best
restraint, when the wearer is in an
upright position and the belts are
properly positioned on the body.
Storing seat and head restraint posi­
tions in memory:
D Memory button.
E Position buttons “ 1” and “ 2” .
Two sets of seat/head restraint posi­
tions may be programmed into
memory. After the seat and head re­
straint are positioned, push memory
button D, release, and within
3 seconds push position button “ 1” .
A second set of positions for the
same seat and head restraint can be
programmed into memory by pushing
first button D and then “ 2” .
Recalling seat and head restraint pos­
itions stored in memory:
To recall a seat/head restraint posi­
tion, push position button “ 1” or “ 2”
until seat/head restraint movement
has stopped. For safety reasons, the
seat/head restraint movement stops
after releasing the position button.
Caution!
Do not remove head restraints except
when mounting seat covers. For
removal refer to “ Practical Hints” ,
page 86. Whenever restraints have
been removed be sure to reinstall
them before driving.