Mercedes-Benz 2010 R-Class, Руководство оператора

Страница: 197 / 364

Blind installed behind second-row seats
X
Removing: Roll up cargo compartment
cover blind.
X
Push release button
=
.
X
Pull cargo compartment cover blind
?
to
the left.
X
Remove cargo compartment cover blind.
X
Installing: For installation behind second
row seats, install the blind extensions
(
Y
page 195).
! For installation behind third-row seats,
the blind extensions must not be installed.
Otherwise, the cargo compartment cover
blind could be damaged.
X
Remove the mount covers in the side trims
of the third-row seats when installing the
cargo compartment cover blind behind the
second-row seats.
Mount cover in the side trims of the third-row seats
X Press on the mount cover at its lower edge
as indicated by arrow.
The mount cover’s upper edge flips up.
X
Remove mount cover by pulling its upper
edge out of side trim in direction of arrow.
i To avoid loss of the mount covers, keep
them in a safe place while not in use, e.g.
the glove box.
X Make sure release button
=
faces up and
the handle
:
is to the rear before inserting
the cargo compartment cover blind.
X
Place left side of cargo compartment cover
blind in left mount.
X
Position right side of cargo compartment
cover blind over right mount.
X
Press release button
=
and guide cargo
compartment cover blind into mount.
X
Make sure cargo compartment cover blind
is securely fastened.
Extending cargo compartment blind
X
Position blind extension
;
over cargo
compartment cover blind
:
.
Guide pins
?
must point directly at
guidings
=
.
X
Turn blind extension
;
and cargo
compartment cover blind
:
in opposite
directions as indicated by the arrows.
Guide pins
?
must engage in guidings
=
.
Loading and storing
195
Controls in detail
251_AKB; 4; 52, en-US
d2ureepe,
Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 195
Z