Mercedes-Benz 2010 R-Class, Руководство оператора

Страница: 101 / 364

The following lamps come on and go out
depending on the brightness of the ambient
light with the SmartKey in starter switch
position
1 or the KEYLESS-GO start/stop
button pressed once:
R
tail lamps
R
parking lamps
R
license plate lamps
R
side marker lamps
When the engine is running, the low-beam
headlamps will also come on and turn off
automatically.
Canada only: High-beam headlamps are only
available with the exterior lamp switch in
position
L
.
Daytime running lamp mode
In Canada, the daytime running lamp mode is
mandatory and therefore in a constant mode.
In the USA, the daytime running lamp mode
is deactivated by default.
X Activate the daytime running lamp mode
using the control system, see “Switching
daytime running lamp mode on or off (USA
only)” (
Y
page 134).
X
Turn the exterior lamp switch to position
$
or
Ã
.
When the engine is running, the low-beam
headlamps come on.
In low ambient lighting conditions, the
following lamps will come on additionally:
R
Tail lamps
R
Parking lamps
R
License plate lamps
R
Side marker lamps
With the daytime running lamp mode
activated and the engine running, you cannot
switch off the low-beam headlamps manually.
Canada only
With the exterior lamp switch in position
$
or
Ã
, you cannot switch on the high-
beam headlamps.
The high-beam flasher is available at all times.
X For nighttime driving turn the exterior lamp
switch to position
L
to permit activation
of the high-beam headlamps.
When the engine is running, and you
R
shift from a driving position to neutral
position
N or park position P with the
vehicle at a standstill, the low-beam
headlamps will go out with a delay of
3 minutes
R
turn the exterior lamp switch to position
T
, the low-beam headlamps, the tail
and parking lamps, the license plate lamps
and the side marker lamps come on
R
turn the exterior lamp switch to position
L
, the manual headlamp mode has
priority over the daytime running lamp
mode
The corresponding exterior lamps come on
(
Y
page 97).
USA only
You can only switch on the high-beam
headlamps in low ambient lighting conditions.
The high-beam flasher is available at all times.
X
For nighttime driving turn the exterior lamp
switch to position
L
or
Ã
to permit
activation of the high-beam headlamps.
When the engine is running, and you turn the
exterior lamp switch to position
T
or
L
, the manual headlamp mode has
priority over the daytime running lamp mode.
The corresponding exterior lamps come on
(
Y
page 97).
Fog lamps
Fog lamps cannot be switched on with the
exterior lamp switch in position
Ã
.
Lighting
99
Controls in detail
251_AKB; 4; 52, en-US
d2ureepe,
Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 99
Z