Mercedes-Benz 2010 GL 350 BlueTEC, Руководство оператора

Страница: 83 / 380

the SmartKey is in the vehicle, the vehicle’s
electrical systems can be switched on or
the engine can be started using the
KEYLESS-GO start/stop button.
:
KEYLESS-GO start/stop button
;
Starter switch
X
Insert the KEYLESS-GO start/stop button
into the starter switch (if not inserted
already).
X
Make sure the automatic transmission is in
park position
P.
X
Do not depress the brake pedal.
KEYLESS-GO start/stop button
=
USA only
?
Canada only
Position 0
Before you press the KEYLESS-GO start/stop
button, the vehicle’s on-board electronics
have status
0 (as with SmartKey removed).
Position 1
X
Press the KEYLESS-GO start/stop button
once.
This supplies power for some electrical
consumers, such as radio functions.
i
If you now press the KEYLESS-GO start/
stop button
R
once more, the ignition (position 2) is
switched on
R
twice more the power supply is again
switched off
Ignition (or position 2)
X
Press the KEYLESS-GO start/stop button
twice.
This supplies power for all electrical
consumers.
All lamps (except low-beam headlamp
indicator lamp, high-beam headlamp
indicator lamp, and turn signal indicator
lamps unless activated) in the instrument
cluster come on. If a lamp in the instrument
cluster fails to come on when the ignition
is switched on, have it checked and
replaced if necessary. If a lamp in the
instrument cluster remains on after
starting the engine or comes on while
driving, refer to “Lamps in instrument
cluster” (
Y
page 314).
i
If you now press the KEYLESS-GO start/
stop button once, the power supply is again
switched off.
Starter switch positions
81
Controls in detail
X164_AKB; 5; 31, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-11T12:30:16+02:00 - Seite 81
Z