Mercedes-Benz 2010 GL 350 BlueTEC, Руководство оператора

Страница: 293 / 380

Display messages Possible causes/consequences and
M
Solutions
Front
Passenger
Airbag
Enabled
See
Operator’s
Manual
USA only:
The front passenger front air bag is activated while driving
even though a child, small individual, or object below the
system’s weight threshold is on the front passenger seat, or
the front passenger seat is empty. Objects on the seat or
forces acting on the seat may make the system sense
supplemental weight.
X
Stop the vehicle in a safe location as soon as possible.
X
Engage the parking brake.
X
Switch off the ignition.
X
Open the front passenger door.
X
Remove child and child restraint from front passenger seat
and properly secure the child in rear seat employing the
child restraint if necessary.
X
Remove any other items from on and around the front
passenger seat and make sure the parcel net on the back
of the front passenger seat is empty.
X
Make sure no objects which apply forces to the seat are
present (e.g. objects such as books, briefcases etc. lodged
behind or around the seat, head restraints pushing against
roof etc.). The system may recognize such forces as
supplemental weight and sense that an occupant on the
front passenger seat is of a greater weight than actually
present.
X
Keep the seat unoccupied, close the front passenger door
and switch on the ignition.
Monitor the
42
indicator lamp in the center
console (
Y
page 45) and the multifunction display in the
instrument cluster for the following:
With the seat unoccupied and the ignition switched on,
R
the
42
indicator lamp in the center console
should illuminate and remain illuminated, indicating that
the OCS (
Y
page 42) has deactivated the front passenger
front air bag.
R
the message
Front Passenger Airbag Enabled See
Operator’s Manual
or the message
Front Passenger
Airbag Disabled See Operator’s Manual should not
appear in the multifunction display at any time the seat is
unoccupied. Wait at least 60 seconds for the system to
complete the necessary check cycles and to make sure
neither message appears in the multifunction display.
Vehicle status messages in the multifunction display
291
Practical hints
X164_AKB; 5; 31, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-11T12:30:16+02:00 - Seite 291
Z