Mercedes-Benz 2009 SLK 300, Руководство оператора

Страница: 82 / 364

Memory function
80
Auto-dimming rear view mirrors
The reflection brightness of the exterior rear
view mirror on the driver’s side and the inte-
rior rear view mirror will respond automati-
cally to glare when the ignition is switched on
and incoming light from headlamps falls on
the sensor in the interior rear view mirror.
The rear view mirrors will not react if reverse
gear
R is engaged or the interior lighting is
switched on.
G
Warning!
The auto dimming function does not react
if incoming light is not aimed directly at
sensors in the interior rear view mirror.
The interior rear view mirror and the exte-
rior rear view mirror on the driver’s side do
not react, for example, if the wind screen is
installed.
Light hitting the mirror(s) at certain angles
(incident light) could blind you. As a result,
you may not be able to observe traffic con-
ditions and could cause an accident.
Memory function
Notes
With the memory function you can store up
to three different configurations.
Each stored position on the driver’s side
includes the following settings:
R
Seat position
R
Steering wheel position
R
Exterior rear view mirrors’ position
G
Warning!
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.
Each stored position on the passenger side
includes the setting of the seat position.
1
Memory button M
2
Memory position button
Storing positions into memory
X Adjust the seats, on the driver’s side also
the steering wheel and exterior rear view
mirrors, to the desired positions.
X Press memory button M.
X
Release memory button M and press mem-
ory position button 1, 2 or 3 within 3 sec-
onds.
When the settings are stored to the
selected position, an acknowledgement
signal sounds.
Controls in detail