Universal transceiver programming
(Automatic door opener)
1.
Turn ignition ON; press and hold
the two outside buttons (A), releasing
only
when indicator light (C) begins
flashing rapidly
after 20 seconds
(this erases factory-set codes)
2.
Hold the end of hand-held remote (B)
2 to 5 inches away from the
HomeLink
®
surface (A)
HomeLink
®
System
1. Power windows
(located on driver’s door)
For “Express”open/close:
Press/lift
portion of switch past
resistance point and release
To interrupt: Tap switch
To partially open/close (any window):
Press/lift
portion of switch
to resistance point; release at
desired position
Outside mirror control
(located on driver’s door)
Press (3, left/4, right) to select
mirror to adjust, then move knob (5)
forward/backward or to either side
Tip: Driver’s-side rear view
mirror includes automatic
dimming feature except when
gear selector lever in R or when
interior dome lamp is turned on
2. Passenger windows switch
lockout
(located on driver’s door panel)
To lock out passenger windows
switches: Press switch; indicator
lamps on
To activate passenger windows
switches: Press switch again
Tip: When mirror switch is in
right side position, passenger
side mirror turns downward
when gear selector lever is in
Reverse to assist driver during
parking maneuvers
3.
Using both hands, simultaneously
push hand-held remote button
(B) and desired HomeLink
®
button
(D or E or F) indicator light will
flash, first slowly then rapidly;
release buttons only when indicator
light changes from a slow to a
rapid flash
Programming is now complete
Repeat these steps to program the
remaining buttons (D or E or F)
Operation
Turn ignition ON; press button
(D or E or F) to open or close the door
Rolling code programming
If device does not operate after
programming, it may have a rolling code
See Operator’s Manual for instructions
on rolling code programming
Reprogramming a single
HomeLink
®
button
1.
Press and hold HomeLink
®
button
(D or E or F) to be reprogrammed; do
not release until step (3) is complete
2.
When HomeLink
®
light (C) starts
flashing slowly, position hand-held
new remote (B) 2-5 inches from the
HomeLink
®
surface (A)
3.
Press and hold remote button (B)
until light (C) changes from slow
to fast blink; release both buttons
If you experience programming
difficulties, See Operator’s Manual
or call Customer Assistance Center
1-800-FOR-MERCEDES
Quick Tips
Mercedes-Benz
E Class
page 12
page 13
W
INDOWS
/M
IRRORS
WINDOWS/
MIRRORS
HOMELINK
®
Always check the Operator’s Manual for more operating information and safety features
3
4
5
2
1
1
A
C
B
DE F
*Standard and optional equipment will vary
2005 E_Class 10.8.04 4/6/05 2:03 PM Page 7
